High Efficient Knitted Wire Mesh
Knitted mesh is made of either crochet or knitting of various wire materials including stainless steel, copper, synthetic fiber and other materials.
Knitted wire mesh products are applied to those applications including cryogenic, high temperature, corrosive atmosphere, heat conductive, high usage, or special service applications.
Our knitted wire mesh is made from all material available in wire shapes for processing of the following parts: Filters Oil and Air Breather Elements, Catalytic Converter Mesh Insulator Blanket Mesh, Mufflers and Silencers, opper Mesh Oil-Bath Separators, ist Elimination Pads Ground Wire Mesh.
Materials:
Monel knitted wire mesh has good corrosion resistance in all extreme environments and it is reasonably conductive and is tough with high tensile strength, giving good wear characteristics.
Knitted wire mesh made of tinned copper clad steel has the best shielding performance of all wires used in knitted meshes, combining low contact resistance with a small degree of permeability. It is not suitable for highly abrasive applications where the TIN plating may wear away to expose the copper. The corrosion resistance of tinned copper clad steel knitted wire mesh is suitable for most applications.
Aluminum knitted wire mesh is mechanically weak and will readily take a compression set and this combined with its readiness to form a non-conducting oxide.
Stainless steel knitted mesh is often used as a protective final layer over the other knitted mesh gasket, materials on order to provide a wear-resistant contact surface.
Properties:
Good distribution of pressure peaks;
Dispersion of air and moisture;
Easy washable and dryable;
Recyclable and non-poisonous.
Features:
Perfort performance in salty water;
Low pressure drop;
High collection efficiency;
Fast delivery and service;
Custom-designed for specific applications;
Efficient and economical for a wide range of applications;
It is convenient for installation, operation and maintenance.
Applications:
Knitted Wire Mesh can be used for General Filtration, Filtration & Separation Supports and Industrial Mesh Supports & Inlays. Knitted wire mesh is also commonly used within our product groups Filters & Filter Elements and Mist Eliminators & Coaleshers (Reactor Internals).
Specifications:
| Model | Material | Wire Diameter | Mesh Width | Mesh Length |
| 200-400 | Stainless Steel | 0.1-0.3mm | 10-1600mm | 10-100m |
| Carbon Steel | 0.1-0.3mm | 50-500mm | 10-100m |
| Copper Brass | 0.1-0.3mm | 100-500mm | 10-100m |
| Aluminum | 0.1-0.3mm | 100-500mm | 10-100m |
| Nickel | 0.1-0.3mm | 10-1600mm | 10-100m |
| Notes:
1. 200-400 model: it has 200 openings in the mesh width of 400mm.
2. Common wire diameter includes 0.20mm, 0.23mm, 0.25mm, 0.28mm.
3. The mesh can be made into single strand, double strand, multi-strand etc.
4. The surface include flattened and crimped. |
Packing: Knitted wire mesh is packed in rolls or plastic spools ,wrapped in moisture-proof paper or plastic film, sutside wooden cases or wooden pallet.
|
|
200-400 Model Knitted Mesh, For Gas/Liquid; Gas/Water; Oil/Water separation Images
|
